HTV Instructions
Siser EasyWeed Instructions –
Specifications: PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
EasyWeed Applies to:
• 100% cotton
• Poly/cotton blends
• 100% polyester
• Leather
Laundering:
• Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean
Siser Glitter
Specifications: PU Composition • Pressure sensitive backing • Glitter finish • 325 Microns/12.8 Mils • 45°/60° blade • Do not layer
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm
Glitter Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Laundering:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Siser EasyWeed Stretch
Specifications: PU Composition • Pressure sensitive backing • Ultra-matte finish • 85 Microns/3.5 Mils • 45°/60° blade • Can be layered
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium/firm pressure for 15 seconds
• Peel carrier hot or cold
EasyWeed Stretch Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Lycra®/Spande
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Siser Glow In Dark:
Specifications: PU Composition • Pressure sensitive backing • Matte finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use light/medium pressure for 10-15 seconds
• Peel carrier hot or cold
EasyWeed Glow Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Siser Metal
Specifications: PET Composition • Pressure sensitive backing • brushed metal finish • 100 Microns/3.9 Mils • 45°/60° blade • Can not be layered
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier cold
Metal Applies to:
• 100% cotton
• Poly/cotton blends
• 100% polyester
Laundering:
• Wait 24 hours before 1st wash
• Machine wash cold / mild detergent
• Hang item to dry
• Do not dry clean
Siser VideoFlex Glitter
Specifications: PU Composition • Static backing • Glitter finish • 110 Microns/4.3 Mils • 45°/60° blade • Can be layered
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
• Cover completed design and press for 5-10 seconds
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier cold
• Cover and reheat for 2-3 seconds
VideoFlex Glitter Applies to:
• 100% polyester
• Poly/cotton blends
• Leather
Laundering:
• Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean